Reader Ad Slot
Reader Ad Slot placeholder
If you would like to support SpookStack without paying out of pocket, please consider allowing advertising cookies. It helps cover hosting costs and keeps the archive free to browse. You can change this choice at any time.
Flying Discs
Page 96
96 / 214
On December 7, 1948 we went out in Mr. NATHAN
SMITH's car and picked up his wife and left his home in
South Pasadena about 11 A.M. We drove out to an airport
where his plane was about forty miles from Pasadena Were
he was having the plane repaired. He wanted to be sure
the plane was on a truck before we left for the destination
where the disc was. In making this trip, we proceeded
out by a race track and passed one of the Kaiser steel
works and the Virginia Dare Wine Orchard. I would say
we went directly north or northeast from Pasadena,
California. We drove through a town called Matonia
(phonetic) and followed a road through some mountains and
through a small desert. I would estimate the distance from
Pasadena to where the disc was found to be about 150 miles.
The terrain in which the dise was found could be described
as flat,desert, and desolate.
t% would like to explain that Mr. PERSON has
private property (an airport which he purchased from the
government) right by the location of the disc. Mr. PERSON
thought the dise might have been launched from his airport,
but whether that was it or not - we don’t know. Mr, PERSON
said he usually flew at an altitude of about 8,000 feet
and, of course, he flew lower in some spaced. He did not
mention his altitude at the time he first saw the disc.
The dise was located practically just outside his property
and we were going north, 980 it would be east of his property.
He has about 900 acres.
When we arrived at Mr. PERSON's property, we saw
the dise, or flying wing, and it was on the ground in a
semi-~vertical position, approximately a 45 degree angle,
with the left wing imbedkd in the ground. In looking at
the ground, it appeared that the object had hit the earth with
considerable force and had slid 300 to 400 feet. It was
dented but was generally intact. I think the pictures I took
with a Revere 8 mm camera quite well show the form, shape
and size of the “wing.” I am 5'7" tall and in standing next
to the object when it was in an upright position, it was
slightly higher than my height. I would say it was roughly
seven feet in diameter, before crashing.
On each side of the object there were wings
approximately four feet by twenty inches and three inches thick
with an axle that protruded through the dise and into the wings.
It was mounted on ball bearings which the dise rotated on.
Community corrections
No user corrections yet.
Comments
No comments on this document yet.
Bottom Reader Ad Slot
Bottom Reader Ad Slot placeholder
If you would like to support SpookStack without paying out of pocket, please consider allowing advertising cookies. It helps cover hosting costs and keeps the archive free to browse. You can change this choice at any time.
Continue Exploring
Explore This Archive Cluster
Broad Topic Hub
Topic Hub
investigation
Related subtopics
Subtopic
Subtopic
Subtopic
Subtopic
Subtopic
Subtopic