◆ SpookStack

Approved For Release 2000/08/11 : CIA-RDP96-00792R000300390001-2 LN190-91 C. TEST SAMPLE FIVE: The test samples were made by heating and forming clear glass tubes. These tubes were four centimeters in diameter and 20 to 25 centimeters long. The two ends were heated and closed, and three millimeter holes in the side indicated the model number and one millimeter holes in the side indicated the bottle number. Inside the tubes was placed two meter lengths of spiraled enamel insulated wire one millimeter in diameter, the spirals were one centimeter in diameter. One end of the wire was sealed into one end of the glass tube, and the other end was free but welded to an M8 nut (see illustration four). Illustration 4: Test sample five: clear glass tube containing two meters of t2 mm enamel coated wire, one end of the wire sealed in an end of the tube D. SAMPLE SIX: This sample was also made by heating and forming clear glass tubes. The tubes were the same size as those in saisple five. The two ends were heated and closed. At one end there was a one millimeter hole. There were no holes on the sides of the tubes. Inside the tubes were a 1.5 meter length of shielded wire one millimeter in diameter. One end of the shielded wire was sealed up int the closed end of the test tube (see illustration five). Illustration 5: Test tube 5: clear glass tube with 1.5 m length of shielded wire inside 45 Approved For Release 2000/08/11 : CIA-RDP96-00792R000300390001-2